Belling IH60R Manual de servicio descargar pdf (Pagina 11)

USING THE HOB - INDUCTION

Hob Status Codes Fault Description Action

"r"

Max Power Setting reached (Only on 13 Amp

versions)

Reduce the power settings on other zones

"U"

Indictes no pan or suitable pan on the cook

zone

Ensure the correct pan size is selected and that the pan is suitable for

induction use

"o"

Indicates control knob has been left in th on

position.

Turn the control knob to the off position to reset

"H"

Residual Heater

"H" will switch off when the glass surface drops below 55

"c" Induction generator over temperature

Check the i

nstallation and free air flow to the hob are as per the installatio

instructions, Normal operation will resume when the appliance is cooled

"C"

Induction heater over temperature the product

will automaticlaly reset, indicates a overheated

pan.

Allow hob to cool and normal operation will resume

(8888) In all the

displays

Control knobs not turned on when electrical

supply is switched on at the cooker socket

Turns the controls Off before switching the power on to the appliance.

Refer to Troubleshooting chart. Also try

switching power off/on to the appliance

to reset the electronics, if the problems

persist call, the customer service hotline

for further assistance.

Appliance Errors &

Alarms

Fault Description

F / - Knob control fault

Turn the controls to the off postion and turn the power off and back on to

reset the system

F / L Knob control limits fault

Turn the controls to the off postion and turn the power off and back on to

reset the system

F / E User interface temperature sensor (NTC) error